Pages
Showing posts with label Robin. Show all posts
Showing posts with label Robin. Show all posts
Sunday, January 4, 2015
Tuesday, October 7, 2014
Kenner 1997 #64276 Batman & Robin Batcave Micro Playset - Pt 3
We're wrapping up our look at the Kenner 'Batman & Robin' Batcave MicroVerse playset by highlighting its operating features. This is a set packed with secret chambers and hidden escape routes and includes the Batmobile and Freezemobile to ensure the action is non-stop. So, on to the action - Enjoy! Opa Fritz and Oma Bettina
High atop the watch tower, waiting for Commissioner Gordon to flash the Bat Signal
Batman and Robin both have private chambers - dressing rooms?
The bottom cave module has three distinct partitions: Mr Freeze's Ice Chamber, the Batcave, and the Museum
The Ice Chamber door raises and lowers to allow egress of the Freezemobile
The vehicle elevator has the most action. There are two vehicle storage holders which are manually raised and lowered
Let's walk through the action.
The Batmobile is parked in its bay and the elevator is on its way up the shaft
The elevator has been raised...
...and with a clockwise turn is locked into place
The vehicle storage holders are raised into position...
...and the Batmobile rolls onto the elevator platform
Turn the platform counter clockwise and lower...
...so that the vehicle can exit via the ramp
There is a slot in the back wall to give the Batmobile a nudge out of the shaft
The Museum floor is in place
Remove the floor...
Place the Freezemobile on the elevator platform (this was designed for the Freezemobile - the Batmobile is too long to fit in the shaft)
...lower the platform
Replace the Museum floor and the Freezemobile is ready for its escape
lift up on the tab to raise the platform and...
...the Freezemobile makes its exit
There's a tab on the back wall as well to raise the Museum elevator
Monday, October 6, 2014
Kenner 1997 #64276 Batman & Robin Batcave Micro Playset - Pt 2
We're finishing off our look at the Kenner MicroVerse Batcave. This et was a licensed tie-in to the not-well-received 'Batman and Robin' movie of 1997. I imagine in some people's eyes, this playset probably has more value than the movie LOL Oh well. I look at the movie as just a nice Batman flick for the kids. Even though there's some things in it that I'm not terribly crazy about it's not the worst movie ever made (can anyone say, 'Attack of The Killer Tomatoes'?) Besides, the movie gave us cool toys, right?
Today's post highlights the interior design of the set and tomorrow we'll show the operating features more fully. The playset is modular with the 'cave' comprising the bottom half and 'Gotham' the top half. My toy, while the box was rough, was in good shape and complete. The set consists of:
-The Cave
-Gotham City
-Lookout tower
-A separate 'museum' floor
-Batman figure
-Robin figure
-Mr. Freeze figure
-Batmobile
-Freezemobile
Measurements:
-Figures are 3/4" (1.9cm) H
-Batmobile is 2 1/2" (6.4cm) L
-Freezemobile 2" (5.1cm) L
-Batcave bottom (folded) 6 1/2" (16.5cm) W x 5 1/4" (13.3cm) D x 4 1/4" (10.8cm) H / (extended) 16" (40.6cm)
-Gotham (folded) 3 3/4" (9.5cm) W x 4 1/8" (10.5cm) D x 2 5/8" (6.7cm) H / (extended) 101/4" (26cm)
-Overall height of the playset (with tower attached)10 1/2" (26.7cm)
The hidden chamber below the museum floor is designed to hold the Freezemobile. The Batmobile is too long to fit inside. Enjoy! Opa Fritz and Oma Bettina
Some of the shots were made in a way that the more industious reader could download and turn into backdrops, perhaps even combining several side-by-side to form a panorama shot
Mr. Freeze's Ice Chamber
Looking down into the elevator shaft
The Museum
Subscribe to:
Posts (Atom)